Skip to main content

Replacement of the roller on the limit switch

Replacement of the roller on the limit switch




Plenzer sulzer loom tw 11



Person rad

sulzer loom housing plenzer

 Taking unit ,,,unit right
 Unit taking unit left image

  1. Turn out screw 1 on limit switch
  2. Replace roper 3 in flowing manner
  3. Locate open position of circlip 4 by turning the roller 3
  4. Apply assembly gripper 5on open position of circlip 4 and force circlip off the bolt 6
  5. Remove bolt 6and toller 3
  6. Clamp dise 7 in assembly gripper 5 and position it in limit switch 2 together with new roller 3
  7. Insert volt 6 observe the position of the groove for the circlip 4
  8. Clam circlip 4 in assembly gripper 5 and press onto bolt 6
  9. Fit limit switch 2 and assist according to adjustment instruc tions b3

Comments

Popular posts from this blog

Sulzer loom digree position

Sulzer loom gdgfjt vfjf gjhddsd vfddd fdggddZvb wigydggz gd hcjfjgjvjc hedh dhshjdbdb jfhvglhwvhbjj Panzer.               50°.    and 005"  gej A am setting      330° right left 45°  Housing.            0°     krash saft 110° fairing Letop.                  190°   letop dish mark niche Conver setting.   330° pu 318  tw11 Taffit rolar           180° from position 0° Sulzer oil pump.  260° opening and position